ASTM International - Standards Worldwide
ASTM
ASTM D4541
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7827
Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM STP1527
Pesticide Formulations and Delivery Systems, 30th Volume: Regulations and Innovation
Code of Federal Regulations
CFR
CFR 21 Part 11
Electronic Records; Electronic Signatures - Scope and Application
Deutsches Institut für Normung & Europäische Norm
DIN EN
DIN EN 13144
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
https://www.din.de/de/mitwirken/normenausschuesse/nmp/veroeffentlichungen/wdc-beuth:din21:293042212
DIN EN 14869-2
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
https://www.din.de/de/mitwirken/normenausschuesse/nmp/veroeffentlichungen/wdc-beuth:din21:141687035
DIN EN 15870
Adhesives - Determination of tensile strength of butt joints
https://www.din.de/de/mitwirken/normenausschuesse/nmp/veroeffentlichungen/wdc-beuth:din21:118099686
DIN 51817
Testing of lubricants - Determination of oil separation from greases under static conditions
China National Standards
GB
GB/T 42342.2
Determination of particle size distribution -- Centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method
https://www.chinesestandard.net/PDF/English.aspx/GBT42342.2-2023
GB/T 41316
Guidelines for Characterization of Dispersion Stability
https://www.gbstandards.org/GB_standard_english.asp?code=GB/T%2041316-2022
International Organization for Standardization
ISO
ISO 13317
Determination of particle size distribution by gravitational liquid sedimentation methods
https://www.iso.org/obp/ui/en/#iso:std:iso:13317:-1:ed-1:v1:en
ISO 13318-2
Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method
https://www.iso.org/obp/ui/en/#iso:std:iso:13318:-2:ed-2:v1:en
ISO 18747-1
Determination of particle density by sedimentation methods — Part 1: Isopycnic interpolation approach
https://www.iso.org/obp/ui/en/#iso:std:iso:18747:-1:ed-1:v1:en
ISO 20427
Pigments and extenders - Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
ISO 21501-2
Determination of particle size distribution
Single particle light interaction methods
Part 2: Light scattering liquid-borne particle counter
ISO 4624
Paints and varnishes - Pull-off test for adhesion
ISO 9211-4
Optics and photonics - Optical coatings - Part 4: Specific test methods: abrasion, adhesion and resistance to water
https://www.iso.org/obp/ui/en/#iso:std:iso:9211:-4:ed-4:v1:en
ISO/TR 13097
Guidelines for the characterization of dispersion stability
https://www.iso.org/obp/ui/en/#iso:std:iso:tr:13097:ed-1:v1:en
ISO/TR 18811
Cosmetics - Guidelines on the stability testing of cosmetic products
https://www.iso.org/obp/ui/en/#iso:std:iso:tr:18811:ed-1:v1:en
ISO/TS 22107
Dispersibility of solid particles into a liquid
Japan Industrial Standard
JIS
JIS K 5600-5-7
Testing methods for paints - Part 5: Mechanical property of film - Section 7: Adhesion test (Pull-off method)
https://infostore.saiglobal.com/en-us/standards/jis-k-5600-5-7-2014-625419_SAIG_JSA_JSA_1436089/
JIS Z 8823-1
Determination Of Particle Size Distribution By Centrifugal Liquid Sedimentation Methods - Part 1: General Principles And Guidelines
https://infostore.saiglobal.com/en-gb/standards/jis-z-8823-1-2001-636705_saig_jsa_jsa_1461863/
Individual advice is important to us
We will be happy to advise you on our equipment, processes and technologies.
